Charts, Pens, Ribbon...

We supply only quality products for use on many of recorders produced by the world leading original equipment manufacturers of process control instrumentation. ABB KENT-TAYLORBAILEYCAMILLE BAUERENDRESS HAUSERFISHER CONTROLSGOERZHONEYWELLKENTMETRAWATTPHILIPSTOSHIBA ALEXANDER WRIGHTB.I.FCHESSELLESTERLINE...


Extension Compensa...

OVERALL MATERIALS FOR COMPENSATING CABLES PVC CoverPVC covering has been widely used as a good substitute for rubber insulator. At YAMARI, PVC is used as the insulator of standard compensating cables...


Metalized Paper 890-...



Portable Meters

pH Meters Salinity Meters Conductivity Meters Dissolved Oxygen Meters Turbidity Meters Colorimeters Multi-Parameter Accessories Datalogger Electrodes Sound Level Meter Hygrometer


Thermal Paper

จำหน่าย Thermal Paper ทั้งแบบสำเร็จรูปขนาดมาตรฐาน และ แบบ ตัดตามขนาดที่ต้องการ Thermal Paperชนิดม้วนหน้ากว้าง 57 มิลลิเมตรความยาว 15 เมตร, 30 เมตร เส้นผ่าศูนย์กลางม้วน 50 มิลลิเมตรรูแกนพลาสติก 1 เซ็นติเมตร


Datalogger Model SK-L200THIIα

 SK Sato


Datalogger Model SK-L200THIIα


  • Memory capacity is 8100 lines of data per channel.
    (It is possible to store data for about 506 days with log interval of 90 minutes and about 168 days with log interval of 30 minutes.)
  • The method of storing data is selectable among four logging options :
  1. Once (default)
    When Once is chosen, the datalogger keeps logging until the memory becomes full. The datalogger stops logging when 8100 lines of data are recorded.
  2. Repeatability (overwriting)
    The datalogger overwrites the existing data from the start once the 8100 lines of data are recorded. This is ideal for collecting data during a certain period.
  3. Ends at (limited amount)
    With this logging option, you can specify the end-point for the datalogger to stop logging. This setting is ideal when you want to limit the amount of data to be collected.
  4. By page (partitioning)
    The storage memory is partitioned into blocks, each having the capacity to store 200 lines of data. This enables the datalogger to perform four different tasks in sequence while storing each task's data in one of the four different memory blocks (pages). This is ideal when you want to collect data from multiple sites using one datalogger.
  • The software for data analysis and realtime transmission is attached as standard accessories.
  • The date and time to start logging automatically can be specified by setting the preset start.
  • The measurement data can be transmitted in realtime to a personal computer.
  • USB transmission is adopted .
  • The upper and lower thresholds for warning can be set. When the temperature or humidity threshold is triggered, the alarm mark (Hi or Lo) will light.
  • Probes are interchangeably used with main units.
  • The storage memory can be verified with the memory indicator.
  • The log interval can be selected from 14 options: 1 sec, 2 sec, 5 sec, 10 sec, 15 sec, 30 sec, 1 min, 2 min, 5 min, 10 min, 15 min, 30 min, 60 min. and 90 min.
  • When the power is turned off, data stored in the EEPROM memory is retained.
  • The datalogger ID can be set. This is useful to identify multiple dataloggers.
  • By using data analysis software attached, acquired data can be evaluated easily and quickly, and also evaluated by using commercial spreadsheet software supporting the "CSV" extension such as Lotus 1-2-3 and Microsoft Excel.


Datalogger for temperature and humidity. 
By using the attached software, logged data can be easily displayed as a graph on a PC. 
Three types of probes are sold separately.